18
MAINTENANCE (CONT’D)
• Make sure powerhead is disconnected
from wand. Then check for blockage
in nozzle connection (B).
• There is an additional panel on the
bottom of the powerhead (C). This
opening provides a secondary place
to check and clear blockage.
Powerhead Blockage
• If the nozzle becomes clogged, use
the following procedures to check for
and clear the blockage.
• If blockage is severe enough the
powerhead will shut off. After the
blockage is cleared you must push
the Overload Protection Reset button
(A) before the powerhead will
operate again.
Kommentare zu diesen Handbüchern